How to Make a Plinko Board: A Step-by-Step Guide
1. Prepare the Board Surface
A good game board is the first thing your DIY plinko game needs. The size of the custom plinko boards depend on how big you want your game to be.
Once you’ve gotten the right size MDF board or have cut your plywood to size and sanded down any rough edges, you want to make your board smooth so the tokens can slide down. You can either spray paint its surface with glossy paint or glue on a marker board. Both work.
2. Place the Pegs
Properly spacing your plinko pegs is key. The size of your tokens will dictate the size of the gaps between your pegs. The gaps have to be large enough for your token to fit through. When you’ve determined the size you need, mark where the first row of pegs will go.
For the next row, use the same spacing, but this time ensure the pegs fall in the middle of the gaps above. Continue this process down the board, leaving space at the bottom for your slots. Be careful, if your spacing is too large, the tokens will fall to the slots in a straight line; too small, and they will get stuck.
Next, add the pegs where you’ve marked. If you used a marker board, pre-drill holes in the board and hammer in dowel rods. If you spray painted your plywood, hammer in finishing nails instead.
3. Cut and Attach the Frame
All sides of the board must be framed, except the top edge. It must be left open because that’s where the tokens will be dropped from. Cut the bottom piece of the frame to be the length of the bottom of the board, plus the width of your frame on each side. Next, cut your left and right frame edges to the appropriate length.
Afterward, use a miter box to create 45-degree angles on the ends of the bottom frame piece. Repeat this with the ends of the left and right frame pieces that will be joined to the bottom piece. Then attach them to the board, securing them with wood glue and brad nails.
4. Make and Attach Slots
Using a spade drill bit on the piece of wood you’ve selected for your slots, drill holes according to the spacings of your last row of pegs. Cut your piece of wood across the middle of these holes, creating your open slots, and stick your slots on to the bottom of the board.
5. Add Legs
A plinko board works best at an angle, as this allows the tokens to slide down the easiest. You must therefore create two legs that allow your board to stand alone at an angle.
Cut and attach two legs at the back of the board on the inside of the frame. Add a thin horizontal lat across the legs to join them together. Then attach a small chain to the lat and the back of the board to prevent the legs from sliding outward.
There You Have It!
Your DIY plinko board is now ready for some backyard fun! Grab your tokens, some cool prizes, and let the games begin!
If building your own plinko board isn’t your cup of tea, no need to worry! Get one of our many options of Plinkos. We can even customize it with your graphics, logos or text and bring the fun to your next event!
More Articles
What is Experiential Marketing?
How POP49 Can Work With You Experiential marketing is a powerful marketing strategy that allows brands to create memorable experiences…
What is Plinko? Game History, Game Dynamics and Why Plinko is Such a Crowd Pleaser
Pop49 – Your Custom Interactive Game Supplier Pop49 is a leading experiential marketing agency supplier. From concepts to execution, we…
What is Large-Format Printing?
Large-format printing plays a crucial role in marketing, as it is widely used by businesses in retail, hospitality, healthcare, entertainment,…